How To Reset LED Strip Lights? Expert Methods Shared

Do your LED strip lights cause issues and don’t work correctly? Well, you can reset the strips based on your light types.

You can turn the power supply off and on. Besides, if your strips come with a remote or controller, you have to find the reset button on them and hold it for 10 to 15 seconds. If it does not work the first time, you can try ⅔ times. 

In this article, I have mentioned the different resetting processes of the LED strip lights. So, check that you can perform the one process based on your strip types. 

Why Would You Need To Reset LED Strip Lights?  

There are many reasons you have to reset LED strip lights. For instance–

• When you face connectivity problems with remote controls or mobile apps that prevent proper control of the lights. 
• If the strips flicker occasionally or constantly, this is a sign of interrupted and unstable power. 
• Often, malfunctions can take place due to hardware or controller issues. For example, the controller freezes or fails to respond.
• Power interruptions or changes in setup that disrupt the normal functioning of the lights.
• Inconsistent color or brightness requires an LED strip light reset.
• Remote control malfunctions or timer interferences can cause the lights to switch off or behave erratically.

• General software or firmware glitches that affect settings and operation

Preparing For Reset: The Checklist  

Before starting the reset process, you have to ensure proper safety and collect the necessary tools. 

Safety Measures

Although you can reset the LED strips easily, you have to consider safety first. Initially, you have to turn off the power source. This way, you can avoid any electrical shock and save the strips. The place where you want to reset the strips, check if the place is well illuminated. 

With the right brightness, you can see the components of the strip properly and prevent damage. At the same time, you have to remove the objects if they interfere with this reset process. 

Necessary Tools

• LED strips
• Batteries
• User manual 
• Controller app

How To Reset LED Strip Lights?  

You can reset the LED strip lights in different ways based on your strip type- 

Method 1: Resetting With A Power Supply

Power On
Begin by connecting your LED strip light to a suitable power source, such as a wall adapter or power supply unit. Turn the strip on and allow it to stay powered for around five seconds. This way, you confirm that electricity is flowing through the system and the strip is operational at a basic level.

Power Off and Unplug
After confirming the strip receives power, you have to turn it off using the switch, remote, or control method provided. Then unplug the power adapter from the socket. This disconnection is essential to initiate the reset process by halting all electrical flow to the strip.

Wait and Discharge
Now, leave the strip disconnected for at least ten seconds. This short pause allows any remaining power in the internal components or controller to fully discharge. This step ensures the system clears any previous errors or memory states.

Reconnect with Button Press
Plug the power adapter back into the socket. At the same time, you should press and hold the power button on the strip itself, on the remote control, or in the connected mobile app. And keep the button held for a few seconds. Check if the strip begins flashing, changes colors, or enters a color cycle.

Complete the Reset
Finally, continue holding the button until the strip lights return to a steady color, power off, or stop flashing. This usually indicates that the reset is complete. At this point, you can release the button. The strip should now be restored to its default factory settings and function properly.

Method 2: Using The Reset Button On The Controller

Many LED strip systems include a built-in reset button on the controller unit, allowing for a quick and reliable reset.

Locate the Reset Button
Find the reset button on the LED strip’s controller box. It’s usually a small, recessed button that may not be immediately visible. Check a pointed object like a paperclip, toothpick, or pin, then press it.

Press and Hold to Initiate Reset
Once located, press and hold the reset button for about 3 to 5 seconds. During this time, observe the LED strip closely.

Watch for Visual Feedback
The strip should begin to flash, blink, or change colors. This response indicates that the reset signal has been received and is in progress.

Release and Wait
After that, let go of the button once the lights start reacting. Allow a few moments for the strip to stabilize and return to normal function. If the LEDs stop flickering and resume steady lighting, the reset was successful.

Repeat if Necessary
If your lights continue to flash erratically or don’t respond properly, try the process again. Sometimes a second reset ensures that all previous settings are cleared.

Method 3: Resetting With A Remote Control

If your LED strip light includes a remote, you can perform a reset using the remote’s power function. For this, follow these steps-

Turn On the LED Strip
Make sure your LED strip is powered on and functioning. This confirms it’s ready to accept commands from the remote.

Power Off and Disconnect
Now use the remote to turn off the LED strip. Once off, you can unplug the power supply from the outlet. This way, you prepare the strip for a full reset by interrupting the power flow.

Prepare to Reset
After that, on your remote control, press and hold the power button firmly. While holding it down, reconnect the power adapter to restore electricity to the strip.

Trigger the Reset
You have to continue to hold the power button as the strip powers back on. Watch for signs like flashing lights or a color-cycling sequence. This visual feedback means the strip has detected the reset command and is processing it.

Complete the Reset
When the lights stop flashing or return to a steady state, release the power button. At this point, the reset is complete. Your LED strip should now be restored to default settings and operate normally with the remote.

Common Issues And How To Troubleshoot Them

You can face many common issues while running the strip lights. Therefore, I have included here some troubleshooting ideas based on different issues–

LED Strip Won’t Turn On

For this, you have to check that all the connectors are tightly secured. At the same time, you can ensure cables or wires are safe. Then, verify the power adapter or wall outlet by connecting other devices to check if it works properly. 

LED Strip Colors Look Wrong

When the strip does not provide accurate colors, you can hold the reset button on the controller. However, when you use smart LED strips, check for updates in the app. A new update can sometimes fix color issues caused by software bugs.

The LED Strip Is Flickering

If your LED strip is flickering, the problem can be in the power supply. Therefore, you have to ensure the power adapter matches the voltage needed for your LED strip.

Also, you can unplug and plug the LED strip back in. Then, check all connectors if any seem damaged or not tightly connected; replace them with new ones.

LED Strip Does Not Respond To Remote Control

First, you can exchange the remote control battery. If it still doesn’t work, you can repair the remote by following the manual instructions.

Tips For Extending The Life Of Your LED Strip Lights

• You can extend the LED strip’s life by matching the voltage and current requirements with a suitable power adapter. This way, you can avoid overloading or underpowering the lights.
• Also, by installing your LED strips on heat-dissipating surfaces like aluminum profiles or metal channels, you keep them cool and prevent damage.
• While installing, you have to clean and dry the mounting surface. So the adhesive sticks well, and the strip stays in place over time.
• You can avoid damage by setting protective covers to waterproof LED strips in damp areas. This will prevent short circuits and increase lifespan. 
• When you choose quality connectors instead of DIY wire splicing, you avoid loose connections and voltage drops.
• Switching off the LED strips when not in use reduces overall usage time and heat buildup, extending their lifespan.
•  Finally, dust and debris can block light and heat dissipation. So you can gently clean the strips with a dry, soft cloth every few weeks.

Conclusion

Resetting LED strip lights is an easy process; however, you have to follow certain steps. After doing the reset method mentioned in the above section, if it does not work, you can perform troubleshooting. Also, I have discussed here about extending the lifespan of the LED strips.

However, if you want the best types of LED strips, contact Mylikeled. We produce strips using high-quality materials and advanced technology. We ensure the product’s performance by doing a quality check before shipping. Our after-sales services are also famous among consumers. 

FAQs

Do LED Strip Lights Have Fuses?

Usually, most LED strip lights do not come with built-in fuses, but it is highly recommended to add an external fuse for safety. A fuse protects against short circuits and potential fire hazards by breaking the circuit.

Can LED Light Strips be Reprogrammed?

Yes, many LED light strips, especially addressable types, can be reprogrammed for custom colors, patterns, and effects. This is usually done using controllers or a smart app. Always check your strip’s compatibility before attempting reprogramming.

Why Don’t the Colors of my LED Lights Change?

There can be several reasons why your LED lights don’t change colors. For instance, incorrect wiring, software issues, insufficient power supply, and more. Therefore, it’s necessary for you to check all connections and ensure the power supply meets requirements.

How to reset the LED strip without the reset button?

When your LED strip lacks a reset button, unplug the power for 10 to 15 seconds. After that, plug it back in. Some models can also be reset by cycling the power on and off. 

How to fix LED strip lights not working?

To fix non-working LED strip lights, first, power off and inspect for damaged or disconnected sections. Then, cut out faulty segments and reconnect using appropriate connectors. Also, check the power supply, remote, and controller for issues. Finally, replace defective parts as needed, following safety precautions throughout the process

How to reset the smart power strip?

To reset your smart power strip, press and hold the reset or power button for about 5-10 seconds until the indicator light blinks rapidly. This restores factory settings and removes all configurations. For specific models, consult your user manual for exact instructions and button locations