Contact us for quotation
Let's have a chat
LED Driver
- Triac/ Phase-cut Dimmable
- 0/1-10V Dimmable
- DALI-2 & Push-Dim Dimmable
- DMX512 Dimmable
- Wireless Bluetooth / ZigBee/ Wi-Fi Dimmable
- Non-Dimmable
What is an LED Driver?
An LED driver is a device that does exactly what it sounds like — it drives power to one or more LEDs. LED drivers are also called LED power supply or LED transformer.
As we mentioned before, one of the benefits of LEDs is that they are energy efficient – they don’t require a lot of electricity to run them. LEDs actually operate on DC at reasonably low voltages – usually between 2V and 4V. Because of this, they need something to convert AC to DC for them and help protect them from any power surges that might occur, causing the LEDs to overheat and cause problems. The LED driver is not only a current management system but also a protective buffer.
What is a Switched Mode Power Supply (SMPS)?
A switched mode power supply (SMPS) designed for LED lighting applications is an LED driver that uses a switching regulator to convert the rectified DC power into a predetermined magnitude of DC power. SMPS LED drivers provide the most efficient and technically mature solution to LED current control. Today’s LED lighting products, in particular those designed for high end applications, place high demands on the driver’s ability to efficiently convert electrical power from an AC source to a DC load with outputs matched to the electrical characteristics of the LEDs. Despite the increasing cost and form factor restrictions in LED luminaire design, switched mode power supplies are still the most preferred type of power converters to drive high performance LED luminaires.
Now all the LED drivers in the market are switched mode power supply.
Triac / Phase-Cut Dimmable LED Driver
Triac / phase-cut dimmable drivers are compatible with mainstream brand dimmers and lighting systems which are leading edge & trailing edge ( forward phase, reverse phase, ELV, Triac, or MLV ) in the market includes Lutron, Clipsal, C-BUS, Leviton dimmer, and other lighting systems.
- PWM output, Not alter LED CRI
- High power factor, PF>0.95
- For Forward & Reverse phase, MLV, ELV
- 5 years warranty
- Continuous & Smooth & Stable
- Full Dimming range: 0-100%
- 10% minimum load
- Flicker-free
Wiring diagram
Triac/0-10V/Resistance/10V PWM (5 in 1) Dimmable LED Driver
- Triac/ 0-10V/ 1-10V/ Resistance/ 10V PWM ( 5 in 1) compatible solution dimmable driver, making it easy for projects and simplify the inventory. They are compatible with a wide array of popular dimmers, including leading & trailing edge types of TRIAC dimmers, 0-10V/ 1-10V/ Resistance/ 10V PWM dimmer and various lighting control systems, such as Lutron, Leviton, Crestron, etc. This makes the drivers easy to integrate into existing lighting installations. The drivers provide smooth and no flicker 0-100% full dimming range and stepless dimming performance.
Wiring diagram
DALI & Push Dim (2 in 1) Dimmable LED Driver
100-277V universal DP dimmable driver with DALI-2 certificate, setting address and fine-tuning output voltage by
NFC, its 0-100% dimming performance, universal compatibility, and flicker-free attract many customers. Also, with high PF &
efficiency is designed for energy saving, with two dimming functions that can save mass stocking. Adopted in many led lights, say
LED tape/strip, modules, LED bar light, cabinet light, kitchen light, and other LED fixtures.
- DALI & Push-Dim 2 in 1
- DiiA member & DALI-2 Certificate
- DT6, DT8
- NFC Function: Setting address and Fine-tuning output voltage
- Continuous & Smooth & Stable
- Flicker-free
- Full Dimming range: 0-100%
- 5 years warranty
Wiring diagram
DMX512 Dimmable LED Driver
DMX512 dimmable LED Driver with NFC/RDM function for setting address, including with constant voltage 1 to 5 Channel
30W to 300W. Setting fine adjustment output voltage by NFC; Constant current 1 to 2 Channel 10W to 40W, Setting output current
by NFC.
Based on DMX 512 protocol, this series will be provided with RDM/NFC function. The Remote Device Management Protocol( RDM), It
can realize the function of remotely assigning addresses, reading device information, devices recognition, and personalizing
devices.
Near Field Communication(NFC) is based on NFC wireless transmission protocol. It can set the DMX address for the power supply
and adjust the output voltage or current of the power supply without power on.
The RDM and NFC functions eliminate unnecessary holes in the power supply and increase the waterproof performance of the
power supply.
- 1CH-5CH (Dimming/CW/RGB/RGBW/RGBCW)
- With RDM remote device management protocol
- Continuous & Smooth & Stable
- Full dimming range: 0-100%
- Flicker-free
- 5 years warranty
- NFC function (Setting address & Fine-tuning of output voltage)
Wiring diagram
Bluetooth, ZigBee, Wi-Fi, Wireless Dimmable LED Driver
Bluetooth/ Zigbee/ Wi-Fi wireless dimming power supply can be equipped with multi-brand wireless communication modules, such as TUYA, JIABITAI, WIZ, CASAMBI, and other wireless dimming modules. The conventional wireless dimmable power supply is equipped with a TUYA wireless dimming module. The lighting can be flexibly controlled through the mobile app. Such as setting scene, area control, timing dimming, music control, etc. The remote control can be realized when the power supply is combined with the Bluetooth/ Zigbee gateway. Voice control lighting can also be realized through the smart speaker.
Upgraded driver with high-frequency exemption assessment 8KHz will come soon…….
Wiring diagram
Bluetooth, ZigBee, Wi-Fi, Wireless Dimmable LED Driver
Why You Should Choose Us?
When you choose LED strips in bulk from us, you’re not just getting a product; you’re gaining a reliable partner dedicated to providing you with top-notch quality, competitive pricing, and unparalleled support.
Premium Quality Guaranteed
Our commitment to quality is unwavering. Every single color LED strip that leaves our production line undergoes stringent quality control measures.
Extensive Range of Options
We offer a comprehensive range of single color LED strips with various lengths, brightness levels, and color temperatures. You'll have the flexibility to select the perfect fit for each application.
Competitive Bulk Pricing
By partnering with us for wholesale purchases, you gain access to competitive bulk pricing. Our streamlined manufacturing processes and efficient supply chain management enable us to offer you cost-effective solutions without compromising on quality.
Expertise and Technical Support
Whether you need assistance in selecting the right product or guidance on installation, our technical support team is always ready to help.
Timely Delivery
We understand the importance of timely deliveries in your business operations. With our efficient logistics network, we ensure that your bulk orders are delivered promptly and reliably, keeping your projects on track.
Global Market
Products are exported to over 60 countries and regions worldwide. Dominates the European market and cooperates with many major well-known brands.
Inspire Creative Lighting With My Like Led!
Contact Information
- Call Us: +86-15920391130
- Email: INFO@MYLIKELED.COM
- Office Address: No. 4 Keying road, Beitai road, Baiyun district, Guangzhou, China
- Factory: Building 12, Liandong U Valley, Guangqing Industrial Park, Shijiao Town, Qingcheng District, Qingyuan City, Guangdong, China
EXPLORE LED STRIPS
Professional LED STRIPS manufacturer
We understand that every project is unique. That’s why we offer tailored LED strip solutions to meet your specific requirements.
Copyright © 2024 – My Like Led All rights reserved.
